Trusted Tips and Resources

Trusted Tips & Resources

Trusted Saskatoon Furnace & Duct Cleaners Explain Air Duct Cleaning

HOW AIR DUCT CLEANING IS DONE

You’ve seen the signs that your air ducts need cleaning, but now you are wondering how air duct cleaning is done. What do you need to be prepared for?

The Steps To How Air Duct Cleaning is Done

Step 1: Inspect The Air Ducts

For two reasons, a simple, visual inspection of the ducts leading to the return and supply registers is important. First, it’s a step that you can take yourself to assess the level of buildup in the ducts beforehand and confirm the difference after they’ve been cleaned.

Second, a professional duct cleaning is an opportunity for Bridge City Duct Cleaning to check the ductwork for leaks or, in the case of flexible ducts, kinks. It is also a good time to repair and replace damaged ductwork.

Step 2: Create Negative Pressure

Bridge City Duct Cleaning uses large, portable or truck-mounted vacuum collection devices to suck dust and debris out of your ductwork. However, before turning on the suction and scrubbing the ducts, the technicians must perform preliminary steps.

  • First, they hook the vacuum collection device’s large hose to a duct close to the air handler—the heart of your HVAC system. The technician cuts an access hole in the duct, inserts the vacuum hose, and seals the joint as tightly as possible.
(Note that your HVAC system has a supply and a return side—ducts that send treated air into the house's rooms, and ducts that return air to the air handler. The supply and return sides are separate, and the duct cleaning process is performed on each.)
    • Next, the technician will seal each register with an adhesive cover. This is an essential step because even a mighty vacuum collection device will not work if the registers in each house room are uncovered.
    • Once the technician finishes these steps, they turn on the vacuum unit. This step creates negative pressure, and particles inside the ductwork will be sucked into the collection device as they are brushed or blown loose.

    Step 3: Agitate The Dust

    Once the system is under negative pressure, the technician uncovers each register and cleans each duct. Technicians use rotating brushes, compressed air tools, and simple vacuum cleaners to ensure dust is dislodged and sucked into the vacuum collection device.

    Step 4: Clean The Rest Of The System

    It is recommended that the other components of the HVAC system, including the air handler’s blower motor, evaporator coil, and drain pan, be cleaned as well.

    Cleaning these components, along with cleaning or changing the filter, will improve the air quality in your home, extend the life of your HVAC system, and increase its efficiency.



    Trusted Saskatoon Air Conditioning & Furnace Pros at JOB Heating & Air Conditioning Explain How to Save on Your Gas Bill!

    JOB Heating & Air Conditioning Saskatoon is eager to provide the best possible customer experience. Their aim is to be a professional resource for our clients before, during, and after the sale! Their team takes pride in service knowledge of modern equipment and training. They are recognized by peers and offer sales, service, training & installations for residential, and commercial Heating, Cooling, and Plumbing systems in Saskatoon and areaJOB Heating & Air are Trusted Saskatoon Plumbers. In their latest tip, they share how you can save on your gas bill! 



    SAVE MONEY ON YOUR NATURAL GAS BILL


    Natural gas is an important part of Canada’s energy resources. More than six million Canadians use natural gas to light, heat and cool homes and businesses, to heat water, and for cooking.  Many Canadians have higher natural gas bills than they would like.


    Check for Aging Equipment

    If you are running an old, inefficient boiler or heating system, it may be wasting much of the energy it produces. It may never have had top-notch efficiency, to begin with, or it may have lost some capability with time and wear.

    Blocked Vents and Impeded Airflow

    The arrangement of the furniture and appliances in your home may block vents and restrict airflow. In this case, your natural gas heating system is likely working overtime because it’s much more difficult to heat your home to a comfortable temperature.

    Lower the Thermostat

    Especially in the winter, when gas bills soar, lowering the thermostat by even a couple of degrees can make a difference in your bill, helping you save as much as 5 to 10%. If lowering the heat would make your home uncomfortable in the evenings, try reducing the temperature only at night, or during the day if family members are at work. 

    Invest in a Smart Thermostat

    JOB Heating & air Conditioning recommend a smart thermostat for your home. A smart thermostat can adjust the heat to your particular schedule, so you won’t have to heat or cool your house even when no one’s home or everyone’s snuggled in bed. 

    Turn Down the Water Heater

    Some homes’ water heaters are set as high as 140 degrees, but most people don’t need their water that hot. To help save money on your gas bill, check your water heater and see if you can turn the temperature down while still allowing for comfortable showers and warm water for dishes.

    Keep Doors and Windows Closed During the Winter and Open During the Cool Summer Nights

    Along the same lines, keep doors and windows closed when your natural gas heating system runs. Opening windows and doors is great for cooling off a hot house on summer evenings, but it will let valuable heat escape in the colder seasons.

    Bundle Up

    Especially in the winter, wearing extra layers helps keep your thermostat settings low and your gas bills reasonable. If you’re wearing a sweater or some cozy flannel pants, you may not even notice that you’ve turned the thermostat down a few degrees. And using extra blankets or down comforters can help keep you warm at night when your thermostat is in its energy-saving mode.

    Natural Gas Check-Up

    Do a check-up on your plumbing, air conditioning and furnace. The check-up may show you how to save money on your Natural Gas Bill.



    JOB Heating & Air Conditioning offers 24/7 emergency service. Known for prompt and courteous service, they are ready to assist if your Saskatoon plumbing heating or cooling system needs repair or if you want to upgrade or update it. Their professional local team is happy to provide free estimates for any home comfort or plumbing improvements you have in mind.

    JOB Heating and Air Conditioning is a Trusted Saskatoon Plumber 



    How Permanent Concrete Foundation Repairs Are From Trusted Saskatoon Contractors K & S Contracting

    K & S Contracting specializes in foundation repair for homeowners across Saskatchewan. In addition, they also offer general contracting services to Saskatoon and the surrounding area. In their latest Trusted Saskatoon tip, K & S Contracting, Trusted Saskatoon General Contractors, and foundation specialists, discuss if concrete foundation repairs are permanent. 


    Are Concrete Foundation Repairs Permanent?

    Remember that not every crack, chip, or spalling is the same, and there is never such a thing as a “permanent” solution to any foundation damage! Changing soil conditions, extreme weather conditions, and a new construction project near your home can result in future foundation damage. Adding to your home’s weight, such as an attached sunroom without underpinning or otherwise strengthening a foundation can also mean eventual damage.


    However, some foundation repair methods are more durable than others and should last for several decades. To better understand your foundation repair choices and their overall longevity, review below: 


    CONCRETE PIERS

    Concrete piers are often installed during the pre-construction phase of homebuilding, and these help support a foundation as it’s being poured and then setting and curing. These piers are also used for sinking foundations, lifting them up and providing added support. Concrete piers are durable and last for decades.

    STEEL PIERS

    Steel piers are similar to concrete piers but are easier to work with and can be installed more readily; concrete requires pouring while fresh, which can require disturbing far more landscaping and lawn than simple steel piers. Steel is also more impervious to moisture and added weight than concrete piers.

    HELICAL PIERS

    Helical piers look somewhat like giant screws and are screwed deeply into the earth, section by section if necessary. They are screwed into the ground until it’s proven that the area can properly hold the required bearing capacity of the structure. Helical piles are a relatively quick, economical foundational solution that provides stability and strength to foundations. They especially come in handy when there is structural damage to a foundation. 

    POLY LIFT

    A poly lift is also a popular way of repairing a sinking foundation; this includes injecting special polyurethane foam into the ground, under the broken foundation section. As the foam dries and hardens, it lifts the foundation into place and restores it to a level and even position. This poly foam doesn’t deteriorate or weaken over time, so it’s typically considered a permanent foundation repair solution.

    CONCRETE SEALANTS AND EPOXY

    Foundation crack sealants and epoxies help fill in cracks and holes that may appear in the foundation of a home. These cracks can result from many factors, including shifting soil, settling foundations, or even water erosion. Foundation crack sealant lasts for approximately 5-7 years.

    While Steve has discussed are concrete foundation repairs permanent, it really depends on what is going on around your home and its foundation. We recommend if you have any concerns, call Steve.

    Trusted Saskatoon Contractors K & S Contracting Discuss Concrete Foundation Cracks

    K & S Contracting specializes in foundation repair for homeowners across Saskatchewan. In addition, they also offer general contracting services to Saskatoon and the surrounding area. In their latest Trusted Saskatoon tip, K & S Contracting, Trusted Saskatoon General Contractors, and foundation specialists, discuss concrete foundation cracks, and what they mean.


    Concreate Foundation Cracks, What Do They Mean?

    When you see a crack in your concrete slab or wall, generally your first assumption is something has been done wrong–but that’s not always the case. Concrete cracks are very common, some are even inevitable, but let’s review them:


    BASEMENT FLOOR CRACKS

    Floor cracks in concrete slabs are relatively common and usually not worrisome on a structural level. They should be repaired to prevent common issues like moisture, insects, and damage from seeping through. When floor cracks leak, it is usually caused by hydrostatic pressure or a high water table. Therefore, sealing the crack will redirect those issues elsewhere.

    VERTICAL AND DIAGONAL FOUNDATION CRACKS

    Usually, a diagonal or vertical crack in the foundation wall is the result of settling in the concrete foundation and is quite common in new construction, especially if your home is built on a hill or your home has rapidly deteriorating soil conditions because of drought or heavy rainfalls. They usually run vertically or diagonally, are often located in the middle section of walls and are less than 1/8 in wide.

    Frequently you will find vertical cracks in block foundations. If the crack is located closer to a corner and is wider than 1/8 in, it is probably not due to shrinkage but indicates a more serious foundation issue. It is recommended you call K & S Contracting to get it inspected as it may be a cause for concern.

    HORIZONTAL FOUNDATION CRACKS

    Horizontal cracks that run across your foundation and/or walls are some of the most serious types your home can suffer. They indicate a severe issue with your foundation’s integrity that must be looked into.

    Most horizontal cracks are caused by excessive water pressure from outside. In addition to other sources of pressure such as soil movement, it has the potential to impact your foundation’s integrity. They tend to expand and ruin the slab itself, possibly even causing it to collapse.

    STAIR STEP CRACKS

    Stair step cracks are among the most common foundation cracks. These cracks are a clear sign of a problematic foundation. Typically, stair step cracks in a block foundation are a result of bowing walls. These cracks will be found toward the corners of the foundation, and are often found with a horizontal crack. In a block foundation, stair step cracks may also be found on the outside of the home. Stair step cracks always require further investigation in order to keep your home safe and supported.

    Curious about the myths and facts of foundation repairs, check out the following post from Steve. 

    Questions or concerns, about your concrete foundation cracks, and what they mean, please contact K & S Contracting. 

    Tips To save Money On Utilities From Trusted Saskatoon HVAC pros at JOB Heating & air Conditioning

    JOB Heating and Air Conditioning is a Trusted Saskatoon Plumber renowned for their excellent reputation, JOB has been a leader in the Saskatoon HVAC industry since 1989. They provide air conditioning, furnace, and plumbing repair, sales, and service to residential and commercial clients in Saskatoon and the surrounding areas. Their team prides itself on being experts in water heating system technology, specializing in new in-floor and boiler installations throughout Saskatchewan.They  also maintain and repair existing hot water heating systems.  Prices are on the rise—fuel, groceries, and now utility bills. Homeowners in Saskatoon and the surrounding areas are all searching for ways to reduce their utility costs, in their latest article they share some tips on how to save energy and money.


    JOB Heating & Air Conditioning Money Saving Utility Tips 


    The good news is that there are numerous money-saving techniques available, ranging from simple changes in usage to the installation of new, efficient appliances. It's important to remember that every plumbing tactic aimed at saving money can make a difference.


    Lower Your Water Heaters Water Temperature


    There’s no doubt that a hot shower works wonders to soothe a person, especially after a long day of work or a night out in the cold. However, is a 140-degree bath significantly more relaxing than a 120-degree one? Most water heaters are set to 140 degrees by the manufacturer. This temperature setting ensures the water feels instantly warm and helps eliminate the risk of legionella bacteria. Lowering the water heater to 120 degrees, though, can save a homeowner up to 10 percent on energy costs and reduce the risk of scalding.

     

    Use Low-Flow Faucets


    We’ve all been preached about how much money goes literally down the drain when the water is left running while brushing teeth in the morning. Most of us have curbed that bad habit but we can make the morning and evening routine even more energy-friendly with the use of low flow faucets. These devices can reduce water usage by 20-50 percent a year by either mixing air within the water or lowering the output from around 2.2 gallons per minute down to 1.5.

     

    Use Flood Detectors


    For around $20, you can buy devices that can be attached to appliances like washing machines to detect leaks and overflows. These units can automatically shut off the appliance or the water supply, offering peace of mind when you start a load of laundry and leave the house. They can potentially save you thousands of dollars in damage if your washer overflows and water seeps into the drywall of the room below.

    Replace Or Repair a Leaky Toilet


    Another drain on your energy bills is a leaky toilet. A toilet that constantly drips or refills every 20 minutes can waste up to 7,000 gallons a month. Fixing a faulty flapper can cost as little as $3 and save you up to $840 a year. Replacing your toilet with a low-flow model can boost those savings to over $1,000 annually. 

    Get a Plumbing Inspection


    Have JOB Heating & Air Conditioning examine the plumbing throughout your home to identify any water loss (and money) through leaks, blockages, or other issues. By detecting and repairing leaks early, you can save money and reduce the risk of severe damage in the future. They will also ensure that shutoff valves and sump pumps are functioning properly in case of an emergency.


    JOB Heating & Air Conditioning offers 24/7 emergency service. Known for prompt and courteous service, they are ready to assist if your Saskatoon plumbing heating or cooling system needs repair or if you want to upgrade or update it. Their professional local team is happy to provide free estimates for any home comfort or plumbing improvements you have in mind.

    JOB Heating and Air Conditioning is a Trusted Saskatoon Plumber 



    Categories

    Previous Posts

    ADDRESS

    S & E Trusted Online Directories Inc
    TrustedSaskatoon.com
    310 Wall St #209
    Saskatoon, SK   S7K 1N7
    Ph: 306.244.4150

    GET THE APP

    App Store Google Play
    Follow us on Facebook Instagram Linked In Twitter YouTube RSS Feed
    Abex
    Abex
    Stevies
    Sabex
    NEYA
    Website hosting by Insight Hosting